 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|||||||||||||||||
 |
Standard 'R' unit
The standard unit, used for roughing and semi-finishing operations, is
mounted directly into a tool hole in the
bar or holder.
Each graduation on the adjusting dial = 0.01 mm / 0.0004 in. adjustment on radius. View mounting dimensions. |
|||||||||||||||||
 |
Top
adjusting 'TR' unit
The top adjusting 'TR' unit, used for light roughing and fine
finishing operations, is mounted
directly into a tool hole in the bar or
holder.
Each graduation on the adjusting dial = 0.01 mm / 0.0004 in. adjustment on radius. View mounting dimensions. |
|||||||||||||||||
 |
Top adjusting
'MBTR'/'SAB' unit
Only used for finishing operations, this
top adjusting unit is bush mounted, and
is designed to fit both new and existing
holes in bars or holders.
Each graduation on the adjusting dial = 0.01 mm / 0.0004 in. adjustment on radius. View mounting dimensions. |
|||||||||||||||||
 |
Top adjusting 'MBU' unit
These fine boring units are designed for
building into boring bars which are
dedicated to (or about) a specific bore
size.
The units are pre-tensioned which eliminates backlash and adjustment is made from the front only. Each graduation on the adjusting dial = 0.005 mm / 0.0002 in. adjustment on radius. Each vernier graduation on the bush = 0.001 mm / 0.00004 in. adjustment on radius. View mounting dimensions. Download Technical Data - CAD Drawings for MBU's. |
|||||||||||||||||
